Today I was looking for some simple but convenient source-code editor. I came across this post, and decided to try Geany. I’m using Slackware 11 at the moment, and as there were no packages available, I downloaded Geany source to compile and install.

However, the ‘configure’ script failed. When trying to compile ‘conftest.c’ with gcc, the following error was produced:

libc.so: file format not recognized; treating as linker script

(Note 1: in the error above, I removed all the paths which were prepended to the actual error message.)
(Note 2: I suspect that this error is the result of incomplete/failed/erroneous update of glibc slackware package I attempted a while ago. Will have to fix that more properly than described below.)

Here’s the solution which helped me to install Geany successfully:
Read the rest of this entry »

Update: if you were looking for a downloadable libmp3lame.so.0, then go here or here.

Today I compiled ffmpeg with –enable-libmp3lame. Of course, first I downloaded, compiled and installed lame (libmp3lame) itself. However, after doing make install for ffmpeg, and then running ffmpeg produced an error:

ffmpeg: error while loading shared libraries: libmp3lame.so.0: cannot open shared object file: No such file or directory

I looked for libmp3lame.so and found one in /usr/local/lib (evidently, ffmpeg couldn’t see it there; ffmpeg was searching for libmp3lame.so.0 in /usr/lib/, not in /usr/local/lib/). It was clear that /usr/local/lib/libmp3lame.so is a symlink to /usr/local/lib/libmp3lame.so.0.0.0. So all I had to do was making one more symlink in /usr/lib/, pointing at /usr/local/lib/libmp3lame.so.0.0.0:

ln -s /usr/local/lib/libmp3lame.so.0.0.0 /usr/lib/libmp3lame.so.0

After this, ffmpeg ran without any problems.

Updated on Apr 8, 2008.

Stimulated by the post of Eric Daniel (who used to have a blog at termitenshort.com), I compiled the most recent ffmpeg SVN source into Linux binary, which runs fine on my shared hosting (note: I’m using older ffmpeg binaries, which are at the end of the post).

mini-FAQ:
Q: Why the title has “for Gallery2″?
A: Just because I avoided the inclusion of libraries, which were not found on my shared hosting server. I hope this will work for other shared hosting environments.

Configuration, version and date can be found in the output of ffmpeg.

Versions built on April, 8, 2008:
ffmpeg (no lame) (checked: can be executed on godaddy shared hosting)

FFmpeg version SVN-r12769, Copyright (c) 2000-2008 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-postproc –enable-swscale –enable-pthreads –disable-debug –enable-gray –disable-ffserver –disable-ffplay –enable-avfilter –disable-network –disable-ipv6
libavutil version: 49.6.0
libavcodec version: 51.54.0
libavformat version: 52.13.0
libavdevice version: 52.0.0
libavfilter version: 0.0.0
built on Apr 8 2008 15:13:14, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
usage: ffmpeg [[infile options] -i infile]… {[outfile options] outfile}…

ffmpeg (with lame). For this one, grab libmp3lame.so.

FFmpeg version SVN-r12769, Copyright (c) 2000-2008 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-postproc –enable-swscale –enable-pthreads –disable-debug –enable-gray –disable-ffserver –disable-ffplay –enable-avfilter –disable-network –disable-ipv6 –enable-libmp3lame
libavutil version: 49.6.0
libavcodec version: 51.54.0
libavformat version: 52.13.0
libavdevice version: 52.0.0
libavfilter version: 0.0.0
built on Apr 8 2008 15:44:31, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

Based on single request: ffmpeg (with lame and libfaac and libfaad). For this one, grab libfaac.so and libfaad.so.

FFmpeg version SVN-r12769, Copyright (c) 2000-2008 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-postproc –enable-swscale –enable-pthreads –disable-debug –enable-gray –disable-ffserver –disable-ffplay –enable-avfilter –disable-network –disable-ipv6 –enable-libmp3lame –enable-libfaac –enable-libfaad
libavutil version: 49.6.0
libavcodec version: 51.54.0
libavformat version: 52.13.0
libavdevice version: 52.0.0
libavfilter version: 0.0.0
built on Apr 8 2008 23:53:57, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

As an experiment, here’s ffmpeg freebsd binary without lame support. Did ran on some FreeBSD 6.3 hosting.

FFmpeg version SVN-r12769, Copyright (c) 2000-2008 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-postproc –enable-swscale –enable-pthreads –disable-debug –enable-gray –disable-ffserver –disable-ffplay –enable-avfilter –disable-network –disable-ipv6 –target-os=freebsd
libavutil version: 49.6.0
libavcodec version: 51.54.0
libavformat version: 52.13.0
libavdevice version: 52.0.0
libavfilter version: 0.0.0
built on Apr 8 2008 16:15:38, gcc: 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

Versions built on Ocotber, 28, 2007:
download ffmpeg without libmp3lame support

FFmpeg version SVN-r10867, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-pp –enable-swscaler –enable-pthreads

–enable-libogg –enable-libvorbis –disable-debug
libavutil version: 49.5.0
libavcodec version: 51.47.1
libavformat version: 51.17.0
built on Oct 28 2007 22:46:10, gcc: 3.4.6

download ffmpeg with libmp3lame support

FFmpeg version SVN-r10867, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: –enable-gpl –enable-pp –enable-swscaler –enable-libmp3lame

–enable-pthreads –enable-libogg –enable-libvorbis –disable-debug
libavutil version: 49.5.0
libavcodec version: 51.47.1
libavformat version: 51.17.0
built on Oct 28 2007 23:04:59, gcc: 3.4.6

Shared hosting testing reports are welcome.

Below you can find even older versions of ffmpeg, which were tested and found functional on GoDaddy shared hosting.
Read the rest of this entry »

If you happen to need to check your linux filesystem, which is mounted read-write, and for some reason you do not want to reboot, then the simple sequence of commands listed below should help you. Note, that the commands provided put you into single-user mode, which kills web-server and mysql daemon.

So, running e2fsck on a live (mounted) filesystem isn’t recommended – and f2sck asks if you really want to check the rw-mounted FS (be sure to answer ‘n’o). If the FS you want to check is root (/), you cannot also re-mount it read-only – unless first you go to single-user mode:

init 1

Now you can re-mount your FS read-only:

mount -o ro,remount /dev/cobd0

(/dev/cobd0 is my device, replace it for your device when repeating step-by-step).
Filesystem is now read-only, and it’s safe to run e2fsck:

e2fsck -D -C 0 -f -t -v /dev/cobd0

e2fsck options are optional:
-D: optimize directory structure
-C 0: show progress
-f: force check (use if you get “volume is clean” with no check)
-t: e2fsck timing statistics
-v: verbose mode

Finally, return to your previous user mode:

init 3

Topologilinux ‘BSOD at launch’ problem solution is at the end of this post.

Topologilinux is a special linux flavour, which is especially fit for the newcomers to the *nix world. The motto of Topologilunux is ‘Running Linux inside Windows’ – and that is what it does. Even more – you can run it inside windows, or you can boot into it and work Linux-only – in both cases the system is the same.
Personally, I consider this kind of setup extremely useful for users who are strongly used to working in Windows (or just stuck with windows for too long), but at the same time are inclined to script a bit (be it bash, Perl, PHP or Python), to run server applications, write cross-platform programs, to test something or just play with software. With Topologilunux, it’s perfectly fine to work in DreamWeaver on your windows machine, and launch Topologilinux with apache+php+mysql to serve as a testing server – on that same machine. You can easily replicate the needed server config, and play with it the way you wouldn’t if that was the production server.
Read the rest of this entry »